Friday

Easy Kids Heart Banner - With FREE Printable


I decided to make a Banner for the PreSchool Age Sunday School Class for Valentine's Day



Of course this could also be simply used as banner at any time of the year and is something a child could make or be helped to make for a friend as a craft at home or at Sunday School.


Basically I wanted something simple & quick to make and for which I would not need to buy extra supplies.


So I came up with this "Jesus Loves Me" banner.




MATERIALS REQUIRED

Computer
Printer
White A4 card
Remnants of Ribbon (or long piece of string)
Staples/Glue
Scissors


The link for the Free Printable for this banner can be found at the bottom of this blog post.




STAGE 1

First thing was to get on the computer
(so difficult for me as I am never ever on the computer - sarcasm here)

I used Ipiccy to make pictures of the hearts with the letters inside them.
Some of the letters are repeated in the phrase so I did not have to do every single letter.




I left the original blank one in case I decided I would like to use the same heart outline for another project.



STAGE 2

This depends on how large you actually want your letters to be.

I felt for the smaller room that it would be big enough to have each heart less than the size of an A6 card so that meant that I could have 5 to each A4 card




Then I used Powerpoint to set out the letters I needed on an A4 sized slide and printed out all the letters involved including 3 blank hearts - never waste space and they can always be used later if not needed now.



STAGE 3

The cutting out was the most tedious part but I normally do that while I'm watching something on TV so not so bad and of course never waste time.






STAGE 4

I hunted through all my remnants of ribbon to see if I would have enough pieces to put together to form a long ribbon to which I could attach all the hearts.
Spacing out the hearts to see how long this ribbon needed to be.

Thank goodness I have a long kitchen table.





STAGE 5

Then I chose the thicker longer ribbon but I could have used the thinner off white ribbon pieces and glued them together behind hearts to make it long enough.


There were 3 reasons for choosing the thicker ribbon
          1.  long enough without having to piece lengths together
          2.  thick enough to not have to be so precise with the glue
          3.  it was actually decorated with little hearts too


Simple Heart Banner Kids Craft - Quick & Easy to make With FREE Printable

So I placed all the letters carefully alongside to get the right spacing before pressing each letter against the glue dots on the roll of dots.




Each heart got some glue in two places (the tops of the curves)




Before I pressed them all unto the ribbon.

As you can see I used glue dots because they make this type of thing so easy, neater & much quicker than using my glue gun.








Don't forget to download your free printable for the "Jesus Loves Me Heart Banner" HERE  if you have not already subscribed to Sandra's Ark


If you have previously subscribed to Sandra's Ark then you will find the link for all my Resources in any of the emails you have received from me.


Or pin this for later:







Don't forget to let me know if you try it out.